test:C86300 Bronze Solid Round Bar 1" Diameter

C86300 Bronze Solid Round Bar 1" Diameter

C86300 Bronze Solid Round Bar 1" Diameter

Question? We are here to HELP!

For tips and advice on the best products for your project, call us at 1.800.875.3558.

  • ITEM OVERVIEW

    SAE 430B bronze can operate at low speeds under heavy loads. This alloy has excellent mechanical qualities and good corrosion resistance. This alloy is compromised of copper, manganese, aluminum and iron. This combination raises the tensile strength.

    Chemical Composition:

    Cu - 60-66%

    Fe - 2.0 - 4.0%

    Zn- 22 - 28%

    Ni - 1.0%

    Mn - 2.5 - 5.0%

    Al - 5.0 - 7.5%

    Machinability - 8

    BHN - 223

    Tensile - 110 ksi

    Yield - 62 ksi

    Similar or Equivalent Specification

    ASTM B505

    ASTM B22

    SAE 430B

    MIL-C-22229, COMP 8

  • TOLERANCES

    Material will have extra stock to finish machine to stated sizes.

C86300 Bronze Solid Round Bar 1" Diameter

C863 | Manganese Bronze | SAE 430B
$3.26
Total Price:
$3.26

How to order multiple pieces

  1. Enter the length of the material above.
  2. Click "Add to Cart".
  3. Enter your total quantity of pieces on the next page (the cost price per piece is lower when ordering more than one of a specific size)
  4. Continue shopping or proceed to checkout

Warning this product may contain chemicals known by the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

how to measure Diameter text will be added here.

How to measure length text will be added here.

how to measure Thickness text will be added here.

how to measure Width text will be added here.

How to measure Inside Diameter text will be added here.

How to measure Outside Diameter text will be added here.

Shipping Restrictions

UPS does a great job shipping our packages at a reasonable price but they have specific limitations when it comes to the maximum size of a package that they will ship.  If your item is over 106” long and/or over 150 lbs it can’t go UPS.  Don’t worry you still have a couple of options.  Many times our customers do not need the full length of the bar they order and have us cut it in half in order to ship via UPS.  To have this done, simply enter “cut in  ½ for shipping” in the “special instructions” box on this page. 

If a shorter piece won’t work for you give us a call and we can work it out for you.  We ship via most of the major LTL carriers 

Shipping Options

UPS does a great job shipping our packages at a reasonable price, but they have specific limitations when it comes to the maximum size of a package that they will accept..  If your item is longer than 72” long and/or over 150 lbs it cannot ship via UPS. 

Don’t worry, you can do one of two things:

MATERIAL THAT CAN BE CUT INTO SHORTER LENGTHS

If your selected material is over 72 inches in length and/or over 150 lbs in weight, but will eventually be cut into smaller pieces, select your material again, but this time using shorter lengths and multiple pieces. Problem solved, it will ship UPS.

MATERIAL THAT CANNOT BE CUT INTO SHORTER PIECES

If your selected material exceeds 72 inches in length and/or 150 lbs in weight and cannot be cut into smaller pieces, no problem, just call us toll free at 888-567-5044 (8:30 am – 5 pm EST), we’ll arrange the shipping for you.